16 December 2014


Here are a few photos of the Rolls-Royce 20/25 engine as we were building it back up. 

It is now back in the car and running well on test.  We will put a few miles on the car before it is returned to its owner and then it will come back to us for a 500 mile service.

Crankshaft damper

Crankcase with crank on right and main bearings, etc, in foreground

Pistons and con rods about to be checked for weights/balancing
Front of crankcase with distributor drive going into position

Timing gears in position

Close up of crankshaft oil feed pipes

Cylinder head with valves, etc, ready to be fitted

Crankcase awaiting cylinder block

View inside the sump - the oil level float/indicator is clearly visible
at the bottom of the picture

Cylinder head and block back in place

Crankshaft damper now fitted

Engine cradle refitted

Engine being craned back into position

Engine back in and connecting up the ancillaries

All connected up and running

No comments:

Post a Comment